News

What Is The Structure Of Wind Power Flange And What Are Its Characteristics

Jul 04, 2019 Leave a message

Wind power flange is a structural part connecting tower tube sections or tower tube with wheel hub, wheel hub and blade, which is usually connected by bolts.The material used for wind power flange is low-alloy high-strength steel Q345E/S355NL, the lowest temperature in the working environment is close to -40℃, and the maximum withstand wind force can reach grade 12. The requirement for heat treatment is normalizing, and the normalizing process can improve the comprehensive mechanical properties of forging flange by refining grain, uniform structure, and improving structure defects.Normalizing degree has a great influence on the microstructure, and the suitable temperature makes grain refinement, so as to obtain good performance. The temperature is too low, the effect is not big, the temperature is too high, the grain size is too big, easy to form the westerian structure, make the performance decline. The results show that the flange with better comprehensive mechanical properties can be obtained by adopting proper normalizing process.Orifice flange this product is based on the traditional flange production process, and then machining. The processing process of flange is known to all, and it is unnecessary to elaborate. The machining part is the processing of pressure measuring hole and lifting hole and bolt groove. The parameters of orifice flange refer to standard HG/ t20592-2009, ANSI B16.36. The components of orifice flange include orifice flange, middle orifice plate, two plugs, one set of bolts and one gasket. According to the specific specifications and models to determine, flange, bolts, gaskets, plug, and the specific parameters of the middle hole plate.General wind power has 65 meters, 70 meters, 85 meters, and more than 100 meters high. In order to facilitate transportation, the tower drum is usually divided into three sections for manufacturing and transportation. It is divided into three sections: top, middle and bottom. In the manufacturing process, flanges are used for connection of each section. Tower cylinder flanges have high requirements for welding deformation and generally require flanges to be turned inside out. Then they go to the construction site to be assembled.

Send Inquiry